Muxponder M400-2C2-20P2Q

Client aggregation up to 600 Gbit/s total capacity and 300G dual wavelength transmission (or up to 400G single wavelength)

Support for multi-service multi-rate clients and efficient transmission with selectable line interface

Available versions:
DCI

Line interfaces2 х CFP2
Examples of linear modes (characteristics are determined by plug-in modules)
Line interface speed2 х 100G2 x 200G2 x 300G1 x 400G
* additional transmission is available on the second line interface 200 G
Modulation formatsDP-QPSK
DP-DQPSK
DP-QPSK / DP-8QAM/
DP-16QAM
DP-8QAMDP-16QAM
FECHD FEC 7% / O-FEC 15%O-FEC 15%
Redundancy supportyesno
Frequency grid50 GHz /100 GHz / FlexGrid (in increments of 6.25 GHz)50 GHz /100 GHz / FlexGrid (in increments of 6.25 GHz)
Frequency range191.25 – 196.1 THz
Transmitter output power-4 dBm-8.5 dBm / -9 dBm/
-8 dBm
-10 dBm-11 dBm
OSNRτ12.9 dB
11.5 dB
15.7 dB / 17.5 dB /
20 dB
20.5 dB24 dB
Receiver sensitivity-32 dBm
-31 дБм
-28 dBm / -28 dBm
-23 dBm
-23 dBm-20 dBm
Receiver overload6 dBm
Automatic dispersion correctionup to ± 77 ns/nmup to ± 48 ns/nm
up to ± 48 ns/nm
up to ± 25 ns/nm
 up to ± 24 ns/nm
Lightning protection (resistance to rapid SOP changes)up to 3 Mrad/sup to 6 Mrad/sup to 500 Krad/sup to 500 Krad/s
Client interfaces20 х SFP+ / SFP28, 2 х QSFP-DD
Transmitting protocolsAggregating of 2 x 300G (or 1 x 400G + 1 x 200G) clients with a total capacity up to 600G:
до 20: 10GE, FC1600 (SFP+)
· up to 16 х 25GE (SFP28)
· up to 12 OTU2, OTU2e (SFP+), FC3200 (SFP28), 50GE (SFP56)
· up to 6 х FlexO (SFP+/QSFP28)
· up to 2 х 100GE/OTU4 (QSFP28)
· up to 2 х 200GE (QSFP-DD/QSFP56)
· up to 1 х 400GE (QSFP-DD)
Power consumptionup to 170 W