Muxponder MS-D100EC2-T10


Aggregation up to 10 x 10G / 6 x 25G clients and transmits up to 100/200 Gbit/s over a single wavelength. 1+1 redundancy in 100 Gbps mode


Support for multi-service clients in one redundant slot

Available versions:
Telecom l Data Center

1MS-D100EС2-DT10 is unit for aggregating multiservice signals and transmitting in a coherent high-speed signal through the CFP2 line interface

MS-D100EQ-DT10 is unit for aggregating low-speed signals via the QSFP28 interface into high-speed transponders M800-1-8Q and M1200-2-12Q for efficient use of optical line resources

Line interfaces2 х CFP2
Line Mode Examples (characteristics are determined by plug-in modules)
Line interface speed2 х 100G (redundancy)200G
Modulation formatsDP-DQPSK
DP-QPSK
DP-8QAM
DP-16QAM
FECHD FEC 7%, SD FEC 15%SD FEC 15%
Redundancy supportyes (100G)no
Frequency grid50 GHz / 100 GHz / FlexGrid (in increments of 6.25 GHz)
Frequency range191.25 – 196.1 THz
Transmitter output power-15…+1 dBm
OSNRτ11.4 dB
* DP-QPSK, SD FEC 15%
18.1 dB
* DP-8QAM, SD FEC 15%
Receiver sensitivity-22 dB
Receiver overload6 dBm
Automatic dispersion correctionup to ± 40 ns/nmup to ± 20 ns/nm
Lightning protection (resistance to rapid SOP changes)up to 5 Mrad/sup to 1.6 Mrad/s
Client interfaces10 х SFP+ / SFP28
Total client capacity up to 100GTotal client capacity up to 200G
Transmitting protocolsAggregating 100G (CFP2):
· up to 10 х 10GE, CPRI7-9, OTU2/OTU2e, STM-64,
FC800/1200 (SFP+)
· up to 6 х FC1600 (SFP+)
· up to 3 х 25GE (eCPRI), FC3200 (SFP28)
Aggregating 200G (CFP2):
· up to 10 х 10GE, CPRI7-9, OTU2/OTU2e, STM-64,
FC800/1200 (SFP+)
· up to 10 х FC1600 (SFP+)
· up to 6 х 25GE (eCPRI), FC3200 (SFP28)
Power consumption, maxup to 125 Wup to 140 W