Muxponder MS-D100EC2-SX10/Q40Q
Aggregation of up to 10 multi-service signals with a total capacity of up to 200 Gbit/s and transmission over 100G at two wavelengths (or up to 200G at a single wavelength)
Support for an extended set of clients in a single redundant slot
Available versions:
Telecom | DCI
| Line Interfaces | 2 х CFP2 | |||
| Line Mode Examples (characteristics are determined by plug-in modules) | ||||
| Line interface speed | 2 х 100G (redundancy) | 1 х 200G | ||
| Modulation formats | DP-DQPSK DP-QPSK | DP-8QAM DP-16QAM | ||
| FEC | HD-FEC 7 %, SD FEC 15% | SD FEC 15% | ||
| Redundancy support | yes | no | ||
| Frequency grid | 50 GHz / 100 GHz / FlexGrid (in increments of 6.25 GHz) | |||
| Frequency range | 191.25 – 196.1 THz | |||
| Transmitter output power | -15...+1 dBm | |||
| OSNRτ | 11.4 dB * DP-QPSK, SD FEC 15% | 18.1 dB * DP-8QAM, SD FEC 15% | ||
| Receiver sensitivity | -22 dBm | -21 dBm | ||
| Receiver overload | 6 dBm | |||
| Automatic dispersion correction | up to ± 40 ns/nm | up to ± 20 ns/nm | ||
| Lightning protection (resistance to rapid SOP changes) | up to 5 Mrad/s | up to 1.6 Mrad/s | ||
| Client interfaces | 6 х SFP+ / SFP28, 4 x QSFP+ / QSFP28 | |||
| Total client capacity up to 100G | Total client capacity up to 200G | |||
| Transmitting protocols | · up to 6 х 10GE, CPRI7-9, OTU2/OTU2e, STM-64, FC800/1200/1600 (SFP+) · up to 3 х 25GE (eCPRI), FC3200 (SFP28) · up to 2 х 40GE/OTU3 (QSFP+) · up to 1 х 100GE/OTU4 (QSFP28) | · up to 6 х 10GE (eCPRI), CPRI7-9, OTU2/OTU2e, STM-64, FC800/1200/1600 (SFP+) · up to 6 х 25GE (eCPRI), FC3200 (SFP28) · up to 4 х 40GE/OTU3 (QSFP+) · up to 2 х 100GE/OTU4 (QSFP28) | ||
| Power consumption | up to 140 W | up to 125 W | ||