SFP+ / QSFP28

First Russian transmit-receive modules T8 LLC and Fiber Trade LLC joint manufacture

Optical transceivers consist of changeable modules, designed for different parameters of transmission lines and inserted in standardized electrical ports of active equipment. It allows optimizing outlays during the designing and especially during the reconstruction of optical networks.
Transceivers are designed to convert electrical signals in optical ones and following transmission using fiber-optical line and further optical-electronic conversion on the reception.
T8 company in conjunction with Fiber Trade LLC developed transceiver modules form factor SFP (SFP+LR and SFP+DWDM) with a transmission rate up to 11.3 Gbit/s and form factor modules QSFP (QSFP28) with the transmission rates up to 103 Gbit/s.


Optical transceiver SFP+LR

  • Support of the ‘hot swapping’
  • Support of rates up to 10 Gbit/s
  • 1310 nm DFB-laser and PIN receiver
  • Power dispersion < 1.5 W
  • Operating temperature -5 ºC ~ +70ºC
  • Maximum communication range 10 km using SMF (single-mode fiber)
  • Availability of DDM (Digital Diagnostic Monitoring is a function of digital control of transceiver performance parameters)
  • LC connector
  • Compliance with standards SFP+ MSA

Optical transceiver SFP+ DWDM

  • Support of data transmission rate up to 11.3 Gbit/s
  • DWDM EML-laser and APD-receiver
  • Maximum communication range 80 km using SMF (single-mode fiber G.652)
  • Support of the ‘hot swapping’
  • LC/UPC interface for bidirectional data transmission using two optical fibers
  • Availability of DDM (Digital Diagnostic Monitoring is a function of digital control of transceiver performance parameters)
  • Compliance with RoHS
  • Supply voltage +3.3 V
  • Power dispersion < 1.5Вт
  • Compliance with standards SFP+ MSA
  • Operating temperatures range:
    • Standard (С): 0ºC ~ +70ºC
    • Extended (Е): -10ºС ~ +80ºС
    • Industrial (I): -40ºС ~ +85ºС

Optical transceiver QSFP28

  • Support of rates up to 103 Gbit/s
  • Data transmission up to 10 km using SMF (single-mode fiber)
  • 4х25G DML LAN-WDM-laser and PIN-transceiver
  • Electrical interface 4x25G
  • Duplex LC connector
  • Supply voltage +3.3 V
  • Availability of DDM (Digital Diagnostic Monitoring is a function of digital control of transceiver performance parameters)
  • Operating temperature 0 ºC ~ +70ºC
  • Power dispersion <3.5 W
  • Compliance with RoHS-6
  • Compliance with standards QSFP28 MSA
  • Linear response to the HF signal in the range -15 dBm .. +17 dBm provides an opportunity to work with available telecommunication components
  • High polarization extinction coefficient ~ 20 dB
  • Able to work with optical capacities over 20 dBm
  • 1.85 mm (V-type) connector